Mounting into an Electrical Box
Mount the transmitter into a 1-gang electrical box (not included).
1. Using a Phillips screwdriver and the two included 6-32 x 3/4-inch truss
combo head screws, attach the transmitter to the electrical box.
2. Attach a decorator style faceplate (not included) to the transmitter.
The optional Crestron
Series faceplate assembly, which is
shown in the illustration below, is sold separately.
Mounting into an Electrical Box
Mounting onto a Flat Surface
Mount the transmitter onto a suitable flat surface such as the underside
of a table.
1. Using a Phillips screwdriver and the two included 6-32 x 1/4-inch
SEMS screws, attach the included surface-mount bracket to the
transmitter.
2. Attach the bracket to the flat surface using the two surface-mount
screw slots and two mounting screws (not included).
Mounting onto a Flat Surface
2
DM-TX-4KZ-100-C-1G
Quick Start
DigitalMedia 8G+® 4K60 4:4:4 HDR Wall Plate Transmitter
