Mounting onto a Rack Rail
Mount the transmitter onto the front or rear rail of a rack.
1. Position the transmitter horizontally so that the holes in the left or
right mounting flange align with the holes in the rack rail.
2. Secure the unit to the rack rail using two mounting screws
(not included).
Mounting onto a Rack Rail
Connecting the Front of the Transmitter
Connect the front of the transmitter as required for the application.
NOTES:
l
The IR OUT and COM ports are enabled only when the transmitter
connects to an Ethernet-enabled DigitalMedia switcher or receiver
that is addressable from a Crestron control system.
l
Pass-through mode for RS-232 and CEC is supported.
For additional information, refer to Online Help Answer ID 1000497
on the Crestron website (
).
Connections to Front of Transmitter
3
DM-TX-4KZ-100-C-1G
Quick Start
DigitalMedia 8G+® 4K60 4:4:4 HDR Wall Plate Transmitter
