Supplemental Guide — Doc. 8325B
DM-TX-4KZ-202-C and DM-TX-4KZ-302-C • 9
HDBaseT Receiver Slot (Slot 9)
When the third-party HDBaseT receiver device is added to slot 9, the HDBaseT Receiver
symbol adds a COM port to the device and enables two-way serial communication.
Addition of HDBaseT Receiver to Slot 9 and COM Port in Slot 1
USB HID control configuration
A keyboard, mouse, or other USB HID compliant device can be connected locally to the USB
HID port of the DM-TX-4KZ-202-C and DM-TX-4KZ-302-C. The USB HID compliant device
can be used to control a remote computer or other host device that is connected to the
USB HID compliant port of a DigitalMedia device, that is, a DigitalMedia transmitter or a
DMC input card of a DigitalMedia switcher.
USB signal routing is handled by the DigitalMedia system. SIMPL Windows allows USB
signal routing from the device connected to the USB HID port of the DM-TX-4KZ-202-C or
DM-TX-4KZ-302-C to the host device that is connected to the USB HID compliant port of
a DigitalMedia device. To configure USB routing, set the <USB_HID_Control> serial input
join to the IP address of the DigitalMedia device to which USB signals are to be routed. The
IP address must be in hexadecimal format. For detailed information about the <USB_HID_
Control> serial input join and about setting the IP address, refer to the SIMPL Windows
help file.
