background image

Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs)
under a limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron
product operating system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-
User License Agreement. Both of these Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_agreement

.

The product warranty can be found at

www.crestron.com/warranty

.

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents

.

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/opensource

.

Crestron, the Crestron logo, Crestron Connect It, Crestron Toolbox, DigitalMedia, DigitalMedia 8G+, DM, and
DM 8G+ are either trademarks or registered trademarks of Crestron Electronics, Inc., in the United States
and/or other countries. HDBaseT and the HDBaseT Alliance logo are either trademarks or registered
trademarks of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI logo are
either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries.
DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the
United States and/or other countries. Other trademarks, registered trademarks, and trade names may be
used in this document to refer to either the entities claiming the marks and names or their products. Crestron
disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in
typography or photography.

©2020 Crestron Electronics, Inc.

Summary of Contents for DigitalMedia 8G+ DM-TX-4KZ-202-C




















Reviews: