background image

4 • DM-TX-4KZ-202-C and DM-TX-4KZ-302-C

Supplemental Guide — Doc. 8325B

Ð

HDMI IN 1–2: HDMI Type A connectors, female;

HDMI digital video/audio inputs;
(DVI and Dual-Mode DisplayPort compatible)

NOTE:

l

The HDMI IN ports require an appropriate adapter or interface cable to
accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI
interface cables are available separately.

l

4K60 4:4:4 performance and HDR support require the use of HDMI and
DisplayPort cables and couplers with a minimum TMDS bandwidth of 18
Gbps.

If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers
with a minimum bandwidth of 10.2 Gbps can be used. Performance may be
reduced when using multiple cables and couplers.

Ñ

DISPLAY PORT IN LED: (DM-TX-4KZ-302-C only) Green LED, indicates video signal

presence at the DisplayPort input

Ò

DISPLAY PORT IN: (DM-TX-4KZ-302-C only) DisplayPort connector, female;

DisplayPort digital video/audio input

NOTE:

4K60 4:4:4 performance and HDR support require the use of HDMI and

DisplayPort cables and couplers with a minimum TMDS bandwidth of 18 Gbps.
If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a
minimum bandwidth of 10.2 Gbps can be used. Performance may be reduced
when using multiple cables and couplers.

Side View, Right

The following illustration shows the right side of the DM-TX-4KZ-302-C.

NOTE:

The right side of the DM-TX-4KZ-202-C provides the same connectors, controls,

and indicators as the right side of the DM-TX-4KZ-302-C.

Summary of Contents for DigitalMedia 8G+ DM-TX-4KZ-202-C




















Reviews: