Crestron
DM-TX-200-2G/400-3G
Wall Plate DigitalMedia™ CAT Transmitters
Hardware Connections for the DM-TX-400-3G
AUDIO IN:
Stereo Line-Level
Audio Input
HDMI IN:
Digital Video/
Audio Input
SPDIF:
Coaxial Digital
Audio Input
Y, Pb, Pr:
Component
Video Input
VID:
Composite
Video Input
USB HID:
Mouse/Keyboard
Input
PC IN:
RGB (VGA) or Component
(Y, P
b
, P
r
) Video Input
L R:
Unbalanced Stereo
Line-Level Audio Input
G B A 24:
To DMNet Port of Switcher,
Receiver or Other DM Device
M:
To Data Management (M) Port of
Switcher, Receiver or Other DM Device
D:
To Video Data (D) Port of Switcher,
Receiver or Other DM Device
Ground
NOTE:
Ensure the unit is properly grounded by connecting the chassis ground lug
to an earth ground (building steel).
NOTE:
To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the table of specifications.
NOTE:
For optimum performance, Crestron requires using DM-CBL DigitalMedia
cable, available from Crestron.
NOTE:
The minimum cable length required for DM-CBL DigitalMedia cable is 15
feet (~4.6 meters).
Operations & Installation Guide – DOC. 6949B Wall Plate DigitalMedia™ CAT Transmitters: DM-TX-200-2G/400-3G
•
25
Summary of Contents for DigitalMedia DM-TX-200-2G
Page 4: ......
