LED Indicators
Refer to the following table for information about the LED indicators on the device.
LED Indicator
Color
Meaning
PWR
Amber
Power is being applied to the device. The device is booting.
Green
Power is being applied to the device. The device is
operational.
INPUT 1-5
Green
The corresponding input is selected. Video is detected and
switched.
Amber
The corresponding input is selected. Video is detected but
is not switched.
AUTO
Green
Automatic switching is enabled.
SETUP
Red
The
SETUP
button is pressed.
DM LITE
Green
(right LED)
A DM Lite link is established.
Flashing amber
Non-HDCP video is detected.
Steady amber
HDCP video is detected.
LAN
Green
An Ethernet link is established.
Flashing amber
Data activity is occurring on the Ethernet link.
Configure the Device
Using the web interface, configure the HD-RX-4K-510-C-E. The HD-RX-4K-510-C-E also hosts
the configuration of the connected transmitters.
To access the web interface, open a web browser and then go to the IP address of the
HD-RX-4K-510-C-E. By default, DHCP is enabled. To display the IP address on the connected
HDMI display, press the
SETUP
button on the front panel of the HD-RX-4K-510-C-E. If the
transmitter has a
SETUP
button, pressing the button on the transmitter will also display the IP
address of the HD-RX-4K-510-C-E.
To log in to the web interface, enter the user name and password. The default user name and
password are both
admin
.
Upgrade the Firmware
Before using the device, upgrade the firmware. The latest firmware can be downloaded from the
HD-RX-4K-510-C-E product page on the Crestron website (
Additional Information
Scan or click the QR code for detailed product information.
Compliance and Legal
Original Instructions:
The U.S. English version of this document is the original instructions. All other languages are a translation
of the original instructions.
Regulatory Model:
M1845002
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not
cause harmful interference and (2) this device must accept any interference received, including interference that may cause
undesired operation.
CAUTION:
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Industry Canada (IC) Compliance Statement
CAN ICES-3 (B)/NMB-3(B)
As of the date of manufacture, the product has been tested and found to comply with specifications for CE marking.
This product is Listed to applicable UL® Standards and requirements tested by Underwriters Laboratories Inc.
Ce produit est homologué selon les normes et les exigences UL applicables par Underwriters Laboratories Inc.
The product warranty can be found at
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents
Certain Crestron products contain open source software. For specific information, please visit
.
Crestron, the Crestron logo, and DM Lite are either trademarks or registered trademarks of Crestron Electronics, Inc. in the
United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI
Licensing in the United States and/or other countries. UL and the UL logo are either trademarks or registered trademarks of
Underwriters Laboratories, Inc. in the United States and/or other countries.
Other trademarks, registered trademarks, and
trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in
typography or photography.
©2019 Crestron Electronics, Inc.
Crestron Electronics, Inc.
15 Volvo Drive, Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
Quick Start - Doc. 8456B
(2053624)
06/27/19
Specifications subject to
change without notice.
