Mounting onto a Rack Rail
Using two rack mounting screws (not included), mount the left or right
mounting flange of the device onto the front or rear rail of a rack.
Rack Rail Mounting Example (DM-NVX-E10 Shown)
Connect the Device
Connect the device as required for the application.
NOTES:
l
The Ethernet port must be connected to a 1000BASE-T Ethernet
switch in order to stream network video.
l
The DM-NVX-E10 and DM-NVX-D10 can be powered via the
Ethernet port, which is a PoE powered device (PD) port. In order for
the device to receive PoE, the Ethernet port must be connected to a
PoE power sourcing equipment (PSE) port of an Ethernet switch.
Wiring that connects to a PoE PSE port is designed for intrabuilding
use only.
Alternatively, the DM-NVX-E10 and DM-NVX-D10 can be powered
by a 24 VDC power pack (PW-2407WU, sold separately).
2
DM-NVX-E10 and DM-NVX-D10
Quick Start
DM NVX® 1080p60 4:4:4 Network AV Encoder and Decoder
