20
•
DM-NVX-36x(C) Encoders/Decoders
Product Manual – DOC. 8879C
Using the Web Interface
To configure multicast TTL:
1.
Click the Settings tab and then click Stream.
2.
In the Advanced section:
a.
Disable Auto Initiation by setting the Auto Initiation toggle switch in the Off
(left) position.
b.
Stop the stream by clicking Stop.
c.
Enable Custom TTL by setting the Custom TTL toggle switch in the On (right)
position.
d.
In the TTL text box, enter the desired TTL value (1 to 255). The default setting
is 5.
e.
Enable Auto Initiation by setting the Auto Initiation toggle switch in the On
(right) position. The stream automatically restarts.
NOTE:
Disabling Custom TTL returns the TTL value to the default setting.
Settings Tab – Stream, Advanced, Multicast TTL Configuration
