DigitalMedia 8G+ Receiver
Crestron
DM-RMC-SCALER-C
4
•
DigitalMedia 8G+ Receiver: DM-RMC-SCALER-C
Operations & Installation Guide – DOC. 7231B
Video Wall Processing
The DM-RMC-SCALER-C also provides zoom capability on its output to display
just a portion of the source image. Using this feature, multiple units may be
combined to configure a high-definition video wall composed of up to 16 individual
displays. Configurations of 2 x 2, 3 x 2, 3 x 3, 4 x 3, or 4 x 4 are supported, and all
that is required is a separate DM-RMC-SCALER-C for each display and a DM
switcher with sufficient DM 8G+ outputs.
LAN Connectivity
Along with high-definition AV and control, DigitalMedia also integrates high-speed
Ethernet networking for a total signal distribution solution. The
DM-RMC-SCALER-C includes a 10BASE-T/100BASE-TX Ethernet port,
providing a convenient LAN connection for a local network device.
USB Extender
Via its USB HID port, the DM-RMC-SCALER-C functions as a keyboard and
mouse extender, allowing a USB HID-compliant keyboard and mouse to be
connected at the display location and used to control a computer or other component
located at the central equipment rack or some other location. Expanded USB signal
routing capability is available using Crestron USB-EXT-DM USB Extenders.*
Embedded Device Control
The DM-RMC-SCALER-C includes built-in RS-232, IR, and Ethernet control ports
to allow programmable control of the display device connected to it. It can also
provide an alternative to such conventional control methods by harnessing the CEC
(Consumer Electronics Control) signal embedded in HDMI. Through its connection
to the control system, the DM-RMC-SCALER-C provides a gateway for controlling
the display device through the HDMI connection, potentially eliminating the need
for any dedicated control wires or IR emitters.
Low-Profile Installation
Its low-profile design makes the DM-RMC-SCALER-C perfect for installation
behind a flat panel display or above a ceiling mounted projector. It mounts to a
standard 2-gang US, UK, or European electrical box using the mounting bracket
provided, affording a clean installation that protrudes only 1 1/8 inches (29 mm)
from the mounting surface.
Connections for the display device are positioned along the top and bottom of the
unit for a clean, serviceable installation. The DigitalMedia connection is provided on
the rear panel within the electrical box. An array of indicators is provided on the
front panel for easy setup and troubleshooting.
* Compatible with Crestron USB-EXT-DM-LOCAL and USB-EXT-DM-REMOTE USB Extenders,
sold separately.
Summary of Contents for DM-RMC-SCALER-C
Page 4: ......
