Crestron
DM-RMC-SCALER-C
DigitalMedia 8G+ Receiver
Operations & Installation Guide – DOC. 7231B
DigitalMedia 8G+ Receiver: DM-RMC-SCALER-C
•
21
4. (Optional) If additional changes to TCP/IP settings are desired,
do the following:
a.
Assign an IP address, IP mask, and default router for the
DM-RMC-SCALER-C via the Crestron Toolbox (
Functions |
Ethernet Addressing
).
b.
Close the “System Info” window.
c.
In Crestron Toolbox, change the Address Book entry for the
DM-RMC-SCALER-C so that it uses the IP address assigned in step
4a.
d.
Display the DM-RMC-SCALER-C’s “System Info” window
(
Tools | System Info
); communications are confirmed when the device
information is displayed.
Firmware
Firmware files may be distributed from programmers to installers or from Crestron
to dealers. Firmware upgrades are available from the Crestron website as new
features are developed after product releases. For details on upgrading, refer to the
Crestron Toolbox help file.
Check the Crestron website to find the latest firmware. (New users must register to
obtain access to certain areas of the site, including the FTP site.)
To upgrade DM-RMC-SCALER-C firmware:
1. Do either of the following:
•
If the DM-RMC-SCALER-C is connected to a DM switcher, use the
Device Discovery Tool in Crestron Toolbox to find the IP address of
the switcher.
•
If the DM-RMC-SCALER-C is used in a standalone configuration
(without a DM switcher), use the Device Discovery Tool to find the IP
address of the DM-RMC-SCALER-C.
2.
Add the IP address found in step 1 to the Address Book in Toolbox.
3.
Download the appropriate .puf file from the Crestron website to the PC.
4 Double-click the .puf file. The Toolbox Address Book opens.
5. From the list in the Address Book, select the DM switcher (if the
DM-RMC-SCALER-C is connected to a switcher) or the
DM-RMC-SCALER-C (if the DM-RMC-SCALER-C is used in a
standalone configuration), and then click
OK.
Either of the following occurs:
•
If the DM switcher was selected, a DM device list is displayed that
allows upgrading all DM devices connected to the switcher.
•
If the DM-RMC-SCALER-C was selected, a DM device list is
displayed that allows upgrading of the DM-RMC-SCALER-C only.
In the DM device lists that are displayed, the checkbox of any item that
needs to be upgraded is automatically selected.
6. Click
Update.
7. After the process is complete, click
Recheck
to verify the upgrade.
Summary of Contents for DM-RMC-SCALER-C
Page 4: ......
