Crestron
DM-TX-200
DigitalMedia™ CAT Transmitter 200
Connectors, Controls & Indicators
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
1
AUDIO
(1) 3.5 mm TRS mini phone jack;
Unbalanced stereo line level audio input;
Input impedance: 10 k
Ω
;
Input level: 2 V
rms
maximum
2
USB HID
(1) USB Type A female;
USB 1.1 device port for mouse, keyboard,
game controller or other USB HID-compliant
device
3
RGB
(1) DB15HD female, RGB (VGA) or
component YP
b
P
r
) video input
2, 3, 4
Formats: RGBHV, RGBS, RG
S
B, YP
b
P
r
;
Input level: 0.5 to 1.5 V
p-p
with built-in DC
restoration;
Input impedance: 75
Ω
;
Sync input type: Autodetect RGBHV, RGBS,
RG
S
B, YP
b
P
r
;
Sync input level: 3 to 5 V
p-p
;
Sync input impedance: 1 k
Ω
;
4
HDMI
(1) 19-pin Type A HDMI female;
HDMI digital video/audio input;
Supports DVI and DisplayPort Multimode
2
5 PWR
LED (1) Green LED, indicates operating power
supplied via DMNet
6
DM LINK LED
(1) Green LED, indicates connection to a
downstream DM device
7
HDMI IN LED
(1) Green LED, indicates HDMI input signal
presence and lock status
8
RGB IN LED
(1) Green LED, indicates RGB input signal
presence and lock status
9
SETUP (LED
and BUTTON)
(1) Red LED and (1) miniature pushbutton for
Ethernet auto-discovery
10
RESET BUTTON
(1) Miniature recessed pushbutton for
hardware reset
11
Ground
(1) 6-32 screw, chassis ground lug
12
DM OUT
5, 6
(1) DM CAT output composed of (2) 8-pin
RJ-45 female, shielded;
Connects to DM CAT input of a DM switcher,
receiver/room controller or other DM device
via DM-CBL or CresCAT-D cable
7
.
13
G B A 24
8, 9
(1) 4-pin 3.5 mm detachable terminal block,
DMNet port;
Connects to DMNet port of a DM switcher,
receiver/room controller or other DM device
via DM-CBL or CresCAT-D cable
7
.
1. An interface connector for the
G B A 24
port is provided with the unit.
2. HDMI requires an appropriate adapter to accommodate a DVI or DisplayPort Multimode signal. RGB
connection requires an appropriate adapter to accommodate a YP
b
P
r
component video signal.
Adapters not included.
3. The RGB input can accept composite and S-video signals through an appropriate adapter (not
included) or direct interface to certain Crestron products. Input sync detection is not provided for
these signal types.
Operations & Installation Guide – DOC. 6741B
DigitalMedia™ CAT Transmitter 200: DM-TX-200
•
11
