background image

DigitalMedia™ CAT Transmitter 200 

 

Crestron 

DM-TX-200

 

modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so and 
all its terms and conditions for copying, distributing or modifying the Program or works based on it. 

 

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the 
original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further 
restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to 
this License. 

 

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), 
conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do 
not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this 
License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent 
license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, 
then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. 

 

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended 
to apply and the section as a whole is intended to apply in other circumstances. 

 

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any 
such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented 
by public license practices. Many people have made generous contributions to the wide range of software distributed through that 
system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute 
software through any other system and a licensee cannot impose that choice. 

 

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 

 

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the 
original copyright holder who places the Program under this License may add an explicit geographical distribution limitation 
excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License 
incorporates the limitation as if written in the body of this License. 

 

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new 
versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns. 

 

Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it 
and "any later version", you have the option of following the terms and conditions either of that version or of any later version 
published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any 
version ever published by the Free Software Foundation. 

 

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the 
author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software 
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all 
derivatives of our free software and of promoting the sharing and reuse of software generally. 

 

NO WARRANTY 

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO 
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE 
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY 
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND 
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE 
COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 

 

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT 
HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED 
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT 
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR 
THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH 
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

26  

  DigitalMedia™ CAT Transmitter 200: DM-TX-200 

Operations & Installation Guide – DOC. 6741B 

Summary of Contents for DM-TX-200

































Reviews: