Crestron
DM-TX-200
DigitalMedia™ CAT Transmitter 200
to the latest version of the Crestron DigitalMedia Design Guide (Doc. 4789) for complete wiring
guidelines.
EDID Format Management
The DM-TX-200 allows for management of the EDID (Extended Display
Identification Data) information that passes between the input source and display
devices in the system. Using Crestron Toolbox™ software, the format and resolution
capabilities of each device can be assessed and managed through the DM-TX-200,
ensuring reliable operation by instructing sources to output only the resolutions and
formats that can be handled by the displays and system wiring.
CEC Embedded Device Control
The primary objective of every Crestron system is to enable precisely the control
desired for a seamless user experience. DigitalMedia provides an alternative to
conventional IR and RS-232 device control by harnessing the CEC (Consumer
Electronics Control) signal embedded in HDMI. Through its connection to the
control system, the DM-TX-200 provides a gateway for controlling the connected
source device right through the HDMI connection, potentially eliminating the need
for any dedicated control wires or IR probes. Through proper CEC signal
management, DigitalMedia allows you to take control of each device in the system
as you like.
Compact and Versatile
The DM-TX-200 is designed to be placed on a shelf or mounted on a flat surface. It
is compact enough to fit discreetly inside a presentation lectern or beneath a table
and can even be concealed inside a divided Wiremold
®
6000 Series Raceway. An
array of indicators on the front of the DM-TX-200 provides for easy setup and
troubleshooting, verifying the status of connections and signal activity at a glance.
Advanced configuration is enabled through Crestron Toolbox software.
A Digital Upgrade for Legacy Systems
The DM-TX-200 also affords a perfect signal converter for integrating DigitalMedia
with analog-based systems like Crestron MPS, QuickMedia
®
and the CEN-RGBHV
series (all sold separately). A simple DB15HD VGA cable connected between the
output of an MPS system and the input of the DM-TX-200 allows every RGB,
component, S-video and composite video input on the MPS to be converted to
DigitalMedia. Analog audio is converted similarly through a simple unbalanced
stereo audio cable. The DM-TX-200’s HDMI input may also be used to expand the
input capabilities of the MPS system to handle digital AV sources.
NOTE:
The RGB input can accept composite and S-video signals through an
appropriate adapter (not included) or direct interface to certain Crestron products.
Input sync detection is not provided for these signal types.
Operations & Installation Guide – DOC. 6741B
DigitalMedia™ CAT Transmitter 200: DM-TX-200
•
3
