6
•
DMF-CI-8: DM NVX and DMCF Card Chassis
Supplemental Guide – DOC. 7861C
Card Status and Configuration
For DM NVX cards, device mode and input routing settings can be viewed and
configured. For DM NVX cards as well as DMCF cards, network settings can be viewed
and configured. In addition, diagnostics can be performed on DM NVX and DMCF cards.
To view card status or to configure a card:
1. Access the Main Menu by pressing the HOME push button.
Main Menu
Main Menu
a
Cards
Chassis
2. Select Cards.
For each card slot (1–8), the corresponding name of the card is listed.
Sample List of Cards
Podium
DM-NVX-350C-00107F0
DM-NVX-350C-00107F0
DM-NVX-350C-00107F0
DM-NVX-351C-00107F0
DM-NVX-351C-00107F0
DM-NVX-351C-00107F0
Not Installed
NOTE:
The card name that is displayed is assigned using the DM NVX web
interface or SIMPL programming. For example, in the sample screen above,
Podium is the name assigned to the card in slot 1. If a name is not assigned, the
display shows the hostname of the card. The default hostname is the model
number of the card followed by
the MAC address of the card. As shown in the
sample screen above, only a portion of the default hostname is visible:
DM-NVX-350C-00107F0 or DM-NVX-351C-00107F0. If a card is not installed in
the slot, the display indicates Not Installed.
3. Select the desired card.
The card status and configuration menu appears on the display for the selected
card. The name of the card is displayed at the top of the screen. For example, if
the card in slot 2 is selected, the screen appears as shown on the following page.
In the sample screen, only a portion of the default hostname is visible:
DM-NVX-350C-00107.
Summary of Contents for DMF-CI-8
Page 4: ......
