Crestron
FT-TSC600
FlipTop Touch Screen Control System
Operations & Installation Guide – DOC. 7593A
FlipTop Touch Screen Control System: FT-TSC600
•
19
“Ethernet Setup” Menu (Additional Parameters)
The additional parameters are
Subnet Mask
,
Default Router
,
Mac Address
and
Domain
. For
Subnet Mask
,
Default Router
or
Domain
, touch
Edit
on the right side of
the menu to open on-screen keyboards like the ones described above.
After all new settings have been made, touch
Reboot
at the bottom of the “Ethernet
Setup” menu to reboot the touch screen, so the new settings can take effect.
Touch
Advanced Settings
to display the “Advanced Ethernet Setup” menu.
“Advanced Ethernet Setup” Menu
The “Advanced Ethernet Setup” menu provides controls for enabling or disabling
SSL (Secure Sockets Layer, a protocol for encrypting information over the Internet)
and for editing the
CIP Port
,
Secure CIP Port
,
CTP Port
and
Secure CTP Port
.
The SSL controls work as follows:
•
Off
disables the SSL capabilities of the FT-TSC600
•
Self
sets up self signing certificates
•
CA
uses an authority to assign the SSL certificates
NOTE:
For more details on SSL settings, refer to the 3-Series Control Systems
Reference Guide (Doc. 7150) at