FlipTop Touch Screen Control System
Crestron
FT-TSC600
26
•
FlipTop Touch Screen Control System: FT-TSC600
Operations & Installation Guide – DOC. 7593A
During touch screen calibration, a crosshair appears at the center of the screen.
Touch the center of the crosshair, which then moves to the upper left part of the
screen. Touch the center of the crosshair and it moves to another part of the screen.
Continue touching the center of the crosshair until calibration is complete.
NOTE:
When touching the screen during calibration, be as accurate as possible.
Touch
to return to the “Diagnostics” menu.
RAVA
On the “Diagnostics” menu, touch
RAVA
to display the “Diagnostics - Rava”
screen.
“Diagnostics – Rava” screen
The “Diagnostics - Rava” screen provides controls for testing the use of Crestron’s
Rava SIP Intercom with the FT-TSC600. It can be used to test projects and settings.
If the intercom works but the project does not, there is an issue with the project; if
the intercom does not work, there is an issue with the settings.
Touch
to return to the “Diagnostics” menu.
