FlipTop Touch Screen Control System
Crestron
FT-TSC600
2
•
FlipTop Touch Screen Control System: FT-TSC600
Operations & Installation Guide – DOC. 7593A
•
High performance H.264 streaming video over Ethernet
•
Seamless integration with Crestron DigitalMedia
•
5 soft-touch capacitive buttons for common functions
•
Hands-free audio conferencing using Rava™ SIP intercom technology
1
•
Customizable audio feedback
•
Built-in microphone and speaker
•
Balanced line out for amplification of the speaker signal
•
PoE+ network powered
•
Configurable connection compartment allows versatile combinations of
pullout cables, cable retractors, connector plates, and AC power
outlets
2
•
Tapered cable notch allows lid to be closed with cables plugged in
•
Universal cutout size fits all new and future FlipTops™
•
Black anodized or brushed aluminum finish
Features and Functions
(Continued)
No Equipment Rack Required!
The FT-TSC600 encapsulates the industry’s best control techniques in a single
space-saving design that can alleviate the need for a separate equipment rack.
Ethernet and Cresnet connectivity affords direct communication with AV, lighting,
and other equipment, and allows for expanded connectivity using C2N-IO Control
Port Expansion Modules
2
and other Crestron control modules.
3
FlipTop Design
Handsomely finished in a choice of black anodized or brushed aluminum, Crestron
FlipTops lend a contemporary metallic accent to conference tables and podiums. The
FT-TSC600 installs cleanly in virtually any flat, horizontal surface up to 1 3/4” (44
mm) thick. Beveled edges provide for a nearly flush appearance.
The FlipTop lid flips open with just the tip of a finger to access the touch screen and
connection compartment. Once connections and touch screen settings are made, the
lid can be closed. A generous, tapered notch at the front of the lid opening allows
interface cables to remain connected even when the lid is closed.
Connection Compartment
The FT-TSC600 is highly configurable to provide a well organized connectivity
solution tailored to each unique application. It provides options for both pullout
cables and panel-mounted connectors, with or without AC power outlets. It comes
standard with two cable pass-through plates and four blank plates, all of which can
be swapped out for a choice of cable retractors, connector plates, and AC power
outlet modules.
1.
Supports audio conferencing with another Rava-enabled device over an IP network, or with any
telephone device through integration with a SIP-compatible phone system or SIP server.
2.
Item(s) sold separately.
3.
To supply Cresnet power via the
NET
port, the FT-TSC600 must be powered using an IEE 802.3at
Type 2 PoE+ PSE (Power Sourcing Equipment). If the FT-TSC600 is powered by an 802.3af or
802.3at Type 1 Poe PSE, no load should be connected to the
24
terminal of the
NET
port, and an
external Cresnet power supply must be used to power any attached dev ices that require Cresnet
power.
