Crestron
FT-TSC600
FlipTop Touch Screen Control System
Operations & Installation Guide – DOC. 7593A
FlipTop Touch Screen Control System: FT-TSC600
•
3
•
Cable Pass-Through Plates
– Each cable pass-through plate provides four
grommeted holes to accommodate Crestron Certified Interface Cables
1
and
other AV, data, and communication cables. The user end of each cable
stows neatly within the connection compartment ready for use while excess
cable simply drops out of sight below the cable pass-through plate. The
grommets provide a smooth, slippery surface for easy pullout of each cable.
Blank caps are also provided to cover any unused holes. The cable
pass-through plates are positioned at the left and right sides of the
connection compartment. The FT-TSC600 supports one or two cable
pass-through plates. Two are included.
•
Cable Retractors
– For an even more refined cable management solution,
the FT-TSC600 accommodates up to six Crestron CBLR Cable Retractors
1
.
Crestron cable retractors feature a patent pending, lever-actuated retraction
mechanism that ensures smooth operation while eliminating hanging cable
loops beneath the table. Up to three cable retractors can be installed in place
of each cable pass-through plate, allowing for a total of six cable retractors.
•
Connector Plates
– If panel-mounted connectors are preferred, the
FT-TSC600 can accommodate up to four FTA-CP Connector Plates
1
.
Connector plates are offered with a variety of common AV and data
connector types. Custom connector plates may also be fabricated by the
installer using the blank plates provided. All four connector plates are
positioned at the center of the connection compartment.
•
AC Power Outlet Modules
– To provide power for laptops and other
portable devices, the FT-TSC600 can be equipped with up to four AC
power outlets. A single FTA-PWR-102 Dual AC Power Outlet Module
1
can
be installed in place of two of the connector plates or two FTA-PWR-102
modules can be installed in place of all four connector plates.
Integrated 5” Touch Screen
Flipping open the “FlipTop” lid exposes a large 5” (127 mm) capacitive touch screen
display, gracefully angled for easy operation and viewing. Smart Graphics
technology provides a stunning custom user interface with fluid gesture-driven
controls, animated feedback, metadata, embedded apps, and high-performance H.264
video. Five soft-touch capacitive buttons are also provided for quick access to
commonly used functions.
Streaming Video
High-performance streaming video capability makes it possible to preview a video
source during a presentation or see a live camera image while video conferencing,
right on the FlipTop screen. Support for H.264 and MJPEG formats allows the
FT-TSC600 to display streaming video from an IP camera, a streaming server
(Crestron CEN-NVS200
1
or similar), a DigitalMedia switcher
2
, or a Capture HD
®
system. Video is delivered to the touch screen over Ethernet, eliminating the need
for any extra video wiring. For more information on video streaming, refer to
Answer ID #5195 at
http://support.crestron.com/app/answers/detail/a_id/5195/kw/streaming%20video
1.
Item(s) sold separately.
2.
Streaming output is currently available on the following DigitalMedia switcher models: DM-MD8X8,
DM-MD8X8-RPS, DM-MD16X16, DM-MD16X16-RPS, DM-MD32X32, and DM-MD32X32-RPS.
