FlipTop Touch Screen Control System
Crestron
FT-TSC600
4
•
FlipTop Touch Screen Control System: FT-TSC600
Operations & Installation Guide – DOC. 7593A
Hands-Free Audio Conferencing
Using Rava SIP intercom technology, the FT-TSC600 enables hands-free VoIP
communication between any two Rava-enabled Crestron touch screens. Rava works
over Ethernet, supporting audio conferencing
1
, intercom, video intercom
2
, and
paging without any special wiring. VoIP phone capability is also possible through
integration with a SIP-compatible IP phone system or SIP server, allowing hands-
free telephone and teleconferencing functionality complete with speed dialing, caller
ID, custom ringers, and other enhancements. Built-in echo cancellation affords true
duplex performance for clear, seamless voice communication using the
FT-TSC600’s integrated microphone and speaker.
Line Output
In addition to its onboard speaker, the FT-TSC600 includes a balanced line level
audio output, allowing the speaker signal to be routed to the room’s audio system.
Amplifying the FlipTop’s audio signal through the room speakers enhances its audio
conferencing capabilities, allowing a small group of individuals to participate in a
conference call using a single FT-TSC600.
1
3-Series Control Engine
The FT-TSC600 features a built-in 3-Series control processor, which can eliminate
the need for a separate rack mounted control system for many applications. Crestron
3-Series delivers a distinctively robust, dynamic, and secure control system platform
capable of faithfully managing a room full of disparate technologies, from audio and
video equipment to lighting, climate control, shades, drapes, and other amenities. Its
modular programming architecture allows the FT-TSC600 to run multiple programs
simultaneously for increased efficiency and flexibility. Rock solid networking and IP
control afford seamless integration with other systems and devices, with add-on
control capability using Crestron touch screens, wireless remotes, and mobile
devices, and remote management through Crestron Fusion™ Enterprise Management
Software.
Cresnet
Equipped with a Cresnet master port, the FT-TSC600 supports the full line of
Crestron keypads, lighting controls, shades, thermostats, sensors, and other devices
that don’t require the higher speed of Ethernet.
3
Control Port Expander
Interfacing with IR, serial, and relay controlled devices is facilitated using the
C2N-IO Control Port Expansion Module
4
. The C2N-IO is a compact device that can
be mounted virtually anywhere. It connects to the FT-TSC600 via the Cresnet port
and provides one bidirectional RS-232 port, one IR/serial port, and two relay ports
for integration with third-party devices. A total of two C2N-IOs can be connected
directly to the FT-TSC600 without requiring an additional power supply
3
. Besides
the C2N-IO, the FT-TSC600 is compatible with the complete line of Cresnet and
infiNET EX
®
control modules, as well as 3-Series control card interfaces.
1.
Supports audio conferencing with another Rava-enabled device over an IP network, or with any
telephone device through integration with a SIP-compatible phone system or SIP server.
2.
H.264 compatible IP camera required.
3.
To supply Cresnet power via the
NET
port, the FT-TSC600 must be powered using an IEE 802.3at
Type 2 PoE+ PSE (Power Sourcing Equipment). If the FT-TSC600 is powered by an 802.3af or
802.3at Type 1 Poe PSE, no load should be connected to the
24
terminal of the
NET
port, and an
external Cresnet power supply must be used to power any attached dev ices that require Cresnet
power.
4.
Item(s) sold separately.
