Supplemental Guide – DOC. 7901B
HD-WP-4K-401-C: 4K Multi-Window Video Processor
•
17
If Custom is selected, enter a valid value in the Underscan text box. Valid
values range from 0–10% in increments of 0.1%. To save the custom
underscan setting, click the Set button.
3.
In the Analog Audio Settings section of the page, do the following:
a.
Mute or unmute the audio output by clicking the Volume button. By
default, audio is unmuted and is set to 0 dB.
b.
If audio is unmuted, adjust the volume level as desired by dragging the
Volume slider to the left or to the right. The volume decreases when the
slider is dragged to the left and increases when the slider is dragged to the
right. Available values range from -80 dB to 20 dB in increments of 0.5%.
c.
To set the audio delay so that the audio is in sync with the video, do either
of the following:
o
Drag the Delay slider to the left or to the right. The Delay text box
displays the value set by the Delay slider.
o
Enter the desired value in the Delay text box. Valid values range
from 0 ms to 150 ms. The default setting is 0 ms. The Delay
slider adjusts to the value entered in the Delay text box.
The Output page also displays information about the connected display and output signal
for both the HDMI and HDBT outputs:
•
The Connected Display section of the page displays the following:
o
Sink Detected: Specifies whether the HDMI and HDBT signal is detected
by the connected display (Yes or No)
o
Manufacturer: Specifies the name of the manufacturer of the connected
display
o
Name: Specifies the model name of the connected display
o
Serial Number: Specifies the serial number of the connected display
•
The Output Signal section of the page displays the following:
o
Transmitting: Specifies whether the HDMI and HDBT outputs are
transmitting a signal to the connected display:
•
A green icon indicates that the output is transmitting a signal.
•
A gray icon indicates that the output is not transmitting a signal.
o
Resolution: Specifies the current resolution of the output
o
HDCP: Specifies the HDCP version (1.4 or 2.2) or inactive
Configuring Outputs on Output-Specific Pages
The output-specific pages allow configuration of the HDMI output and the HDBT output on
an individual basis. Output settings and automatic power settings can be configured for
each output. In addition, information about the connected display and the output signal can
be viewed.
To configure HDMI output settings and to view information about the connected display and
HDMI output signal, do the following: In the navigation bar, click Output and then click
HDMI Output. The HDMI Output page opens.
Summary of Contents for HD-WP-4K-401-C
Page 4: ......
