Supplemental Guide – DOC. 7901B
HD-WP-4K-401-C: 4K Multi-Window Video Processor
•
23
Configuring Device Settings
Configuration and management of device settings consist of the following:
•
Control system connection
•
Enabling or disabling the front panel
•
Changing the user name and password
•
Configuring RS232 port settings
•
Updating firmware
•
Restoring the factory default settings
•
Rebooting the HD-WP-4K 401-C
To configure device settings, do the following: In the navigation bar, click Device.
The Device page opens. Refer to the following sections for information about configuration
and management of the various device settings.
Configuring Control System Connection Settings
Configure the connection between the HD-WP-4K-401-C and a control system in the
Control System Connection section of the Device page.
Device Page—Sample Control System Connection
To configure control system connection settings, do the following:
1.
In the Address or Host Name text box, enter the IP address or host name of the
control system.
2.
In the IP ID text box, enter the IP ID of the HD-WP-4K-401-C. Valid values range
from 03 to FE in hexadecimal notation.
3.
In the Port text box, enter the port number of the HD-WP-4K-401-C.
NOTE:
The default port number is 41794.
4.
Do either of the following:
•
To save the current entries, click the Save button. A message appears,
indicating that the HD-WP-4K-401-C will reboot. Click OK to reboot the
device.
•
To revert to the previous settings without saving the current entries, click
the Revert button.
The Status field (read only) displays the connection status of the HD-WP-4K-401-C to the
control system as Offline or Online.
Summary of Contents for HD-WP-4K-401-C
Page 4: ......
