Supplemental Guide – DOC. 7901B
HD-WP-4K-401-C: 4K Multi-Window Video Processor
•
35
Configuring Output Settings
To configure output settings, do the following:
1.
On the main menu, select Outputs. The Outputs submenu opens.
Outputs Submenu
< Outputs >
Output 1
Available selections are Output 1 and Output 2.
2.
Configure an output by selecting the output in the Outputs submenu. The Output
Configuration submenu opens for the selected output.
Output Configuration Submenu (Output 1 Shown)
< Output 1 >
Status
Items on the Output Configuration submenu are listed in the following table.
Refer to the table for configuration guidelines.
Output Configuration Submenu Guidelines
SUBMENU
ITEM
GUIDELINES
Status
(Read Only) Displays the manufacturer, model, and serial number of
the connected display. If no display is connected, the status is
displayed as Inactive.
Name
Allows renaming of an output. To rename an output, use the up (
)
and down (
) buttons to enter capital letters, lowercase letters,
numbers, a plus sign (+), a minus sign (-), a left bracket ([), and a
right bracket (]). To move the cursor to the left or right when
renaming an output, press the left (
) or right (
) button,
respectively. To save the name, press the Enter button.
The message Saving…Complete is displayed.
Configuring Network Settings
To configure network settings, do the following: On the main menu, select Network.
The Network Status and Configuration submenu opens.
Network Status and Configuration Submenu
< Network >
Status
Available selections are as follows:
Status
DHCP
DHCP Renew (Displayed only if DHCP is set to ON)
IP Setup (Displayed only if DHCP is set to OFF)
DNS Server 1
DNS Server 2
Items on the Network Status and Configuration submenu are listed in the following table.
Refer to the table for configuration guidelines.
Summary of Contents for HD-WP-4K-401-C
Page 4: ......
