Crestron
FSKTPS-5000/6000
Isys™ Touchpanels
Field Service Guide - DOC. 5956
Field Service for Isys™ TouchPanel: FSKTPS-5000/6000
••
1
Field Service for Isys™
TouchPanel: FSKTPS-5000/6000
Nose Replacement
The new nose of the TPS panel is designed to eliminate static discharge from the speaker
assembly thereby preventing possible panel damage. Simply swap the new nose for the
existing nose to remedy the problem. The only tools required for the replacement include a
grounding strap (or grounded workstation) and a #1 Phillips screwdriver with flexible tip.
Some touchpanels in the field have the internal base plate painted. Those touchpanels require
additional materials and steps to complete the replacement task. The additional required
materials are masking tape, nylon brush, a cotton swab or cloth (non-abrasive), and Bix
Stripper (or equivalent).
CAUTION:
The nose and touchpanel contain electrostatic sensitive devices (ESDs).
Perform the following procedure while wearing a grounding strap that is properly grounded
or on a grounded workstation to avoid damaging the touchpanel.
NOTE:
If the angle of the touchscreen needs to be adjusted, refer to the latest revision of the
TPS-5000 or TPS-6000 Operations Guide (Doc. 5863 or 5864, respectively) for instructions
of how to use the touchpanel position lock buttons. The latest version of the appropriate
Operations Guide can be obtained from the Downloads page (MANUAL Library) of the
Crestron website (www.crestron.com). New users are required to register to obtain access to
the FTP site.
NOTE:
The diagrams in this procedure show a TPS-6000 touchpanel but the steps for
installation into the TPS-5000 are identical.
1.
If the optional external power pack is utilized, disconnect the plug of the power
pack from the touchpanel rear port labeled 24VDC 2A.
2.
To prevent errors when re-connecting, label and disconnect all cables attached to
the touchpanel rear panel ports.
3.
If necessary, use the touchpanel position lock buttons to adjust the touchscreen to
the maximum (most vertical/upright) angle.
