Isys™ Touchpanels Crestron
FSKTPS-5000/6000
4
••
Field Service for Isys™ TouchPanel: FSKTPS-5000/6000
Field Service Guide - DOC. 5956
Remove Paint from Defined Area
APPROX.
DEPTH
2 INCHES
REMOVE PAINT FROM THIS INTERIOR AREA.
15.
Check for dry spots; apply stripper to those areas again.
16.
Wait a few minutes while the stripper lifts (bubbles) the paint from the metal
surface.
17.
Use a cotton swab or cloth (non-abrasive) to wipe away the loose paint from the
interior face of the base plate.
18.
Repeat steps 14 through 17 if any paint remains in the defined area.
19.
Remove the masking tape from the exterior face of the base plate and carefully
remove excess stripper and loose paint caught in the holes.
20.
Re-insert the two rubber feet into the appropriate holes of the base plate.
