Applications Guide
Crestron
MediaManager™
QM-MD7X2 Matrix Switcher/Mixer
Features of the QM-MD7x2 include the following.
•
Three composite/S-video/component (nine BNC connectors) and two
RGBHV (15-pin) inputs with built-in sync sensing
•
One RGBHV monitor pass-through connector
•
Two QuickMedia input ports
•
Two QuickMedia output ports
•
Local control panel for stand-alone operation
•
Seven analog audio inputs: Two local Mic inputs, five
balanced/unbalanced stereo audio inputs (screw terminal format)
•
Two QuickMedia (digital) audio inputs. Each with: stereo audio, two
Mic Channels, and full cross-point switching with audio break-away
•
Local analog balanced/unbalanced audio outputs. Local audio outputs
follow the two QM outputs. Each output with: Two-channels of
program audio (left & right), one-channel speech, volume/bass/treble
control, 12-band parametric EQ, and 40ms delay for speech output
•
Local audio outputs permit routing any QM program audio or local
program inputs to either local (Program left/right, plus speech) or QM
audio outputs
•
Includes two 4-channel MIC-mixers: one for each output group. Each
four-channel Mic-mixer output can be a mix of any one QM Mic inputs
with the two local Mic-inputs, for a total of four simultaneously active
microphones
•
Each local program left, program right and speech output channel
features the additional capability of mixing the left and right program
inputs routed to that channel with the Mic-mixer output for that group
•
Route (without-mixing) any QM or local program left/right audio
channels plus the four-channel Mic-mixer output to either QM audio
output
•
Local speech outputs include up to a 40ms delay
QM-MD7X2 Front and Rear View
•
Crestron MediaManager™
Applications Guide – DOC. 6244
26
