Applications Guide
Crestron
MediaManager™
To achieve the best solution the projector should also support lamp hours
monitoring, allowing for better facility management.
Refer to the Crestron Database in System Builder or
www.crestron.com
|
Dealer/Tech Resources | Whose Products Do We Control?
for a list of
supported products. You may search by manufacturer or device type. You may
also call the Crestron customer service team or check our online help system for
the latest information.
QM Network Wiring
When connecting multiple QM devices, the route between a QM origination
point (e.g., QM-WMC) and a QM endpoint (e.g., QM-RMCRX) cannot have
more than two midpoints (e.g., QM-MD7x2 or other QM switchers). Refer to
the following diagram when configuring a QM network.
QM Network Topology
QM-WMC
QM-WMC
QM-FTMC
QM
QM
QM
QM
QM
Origination Points
QM
QM-RMCRX
Endpoints
QM-MD7x2 acts as
an endpoint for
audio only.
QM-MD7x2
This
RX
cannot be used as
it violates the two-
midpoint rule.
Q
QM-MD7x2
QM-MD7x2
QM
Midpoints
QM-RMC
M-RMCRX
X
•
Crestron MediaManager™
Applications Guide – DOC. 6244
4