Crestron
MediaManager™
Applications
Guide
QuickMedia Equipment
Adding a MediaManager wall plate or a FlipTop box anywhere in a room
creates a fully integrated system, because these devices connect to Cresnet,
Crestron’s control protocol. With the addition of a QuickMedia receiver and
keypad or touchpanel, you create a complete integrated room solution.
Wall Plate Media Centers
The Wall Plate Media Center (QM-WMC) and Wall Plate Media Center with
Microphone Input (QM-WMIC) are part of Crestron’s MediaManager line of
network devices, room control systems and signal routing solutions.
The QM-WMC is a wall-mounted, double-gang, Cresnet device that uses
QuickMedia technology to facilitate an uncomplicated connection of audio,
video, and computer equipment to the Crestron line of room control systems.
The QM-WMC installs into a wall using standard electrical double-gang boxes
and decorator style faceplates (sold separately).
The QM-WMIC is an optional device that links to the QM-WMC. It adds two
Neutrik™ Combo microphone inputs with switchable phantom power to the
QM-WMC and extends the QM-WMC to 3-gang box. The QM-WMIC requires
the purchase and installation of the QM-WMC.
NOTE:
The QM-WMIC only mounts on the right side of the QM-WMC.
All media and control signals are routed via a single QuickMedia cable for
simple installation. The QM-WMC can be combined in a multi-gang electrical
box with Crestron’s C2N-DB6/8/12 decorator-style keypads for additional room
control functions such as source selection, lighting, and volume.
QM-WMC and QM-WMIC Wall Plate
QM-WMC/WMIC and C2N-DB8 Wall Plate
Applications Guide – DOC. 6244
Crestron MediaManager™
•
5