background image

Mud Mount Kits 

 

Crestron 

MMK-12L & WMKM-12L

 

Return and Warranty Policies 

Merchandise Returns / Repair Service 

1.  No merchandise may be returned for credit, exchange, or service without prior 

authorization from CRESTRON. To obtain warranty service for CRESTRON 
products, contact the factory and request an RMA (Return Merchandise 
Authorization) number. Enclose a note specifying the nature of the problem, name 
and phone number of contact person, RMA number, and return address. 

2.  Products may be returned for credit, exchange, or service with a CRESTRON Return 

Merchandise Authorization (RMA) number. Authorized returns must be shipped 
freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J., or its authorized 
subsidiaries, with RMA number clearly marked on the outside of all cartons. 
Shipments arriving freight collect or without an RMA number shall be subject to 
refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 
15% restocking fee, plus shipping costs, on any products returned with an RMA. 

3.  Return freight charges following repair of items under warranty shall be paid by 

CRESTRON, shipping by standard ground carrier. In the event repairs are found to 
be non-warranty, return freight costs shall be paid by the purchaser. 

CRESTRON Limited Warranty 

CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in 
materials and workmanship under normal use for a period of three (3) years from the date of 
purchase from CRESTRON, with the following exceptions: disk drives and any other moving or 
rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) 
year; touchscreen display and overlay components are covered for 90 days; batteries and 
incandescent lamps are not covered. 
This warranty extends to products purchased directly from CRESTRON or an authorized 
CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and extent of the 
dealer's warranty, if any. 
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in 
any application other than that for which it was intended, or if it has been subjected to misuse, 
accidental damage, modification, or improper installation procedures. Furthermore, this warranty 
does not cover any product that has had the serial number altered, defaced, or removed. 
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall 
CRESTRON be liable for incidental or consequential damages of any kind (property or economic 
damages inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for 
any claim made by a third party or made by the purchaser for a third party. 
CRESTRON shall, at its option, repair or replace any product found defective, without charge for 
parts or labor. Repaired or replaced equipment and parts supplied under this warranty shall be 
covered only by the unexpired portion of the warranty. 
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed 
or implied, nor authorizes any other party to offer any warranty, including any implied warranties 
of merchantability or fitness for a particular purpose. Any implied warranties that may be imposed 
by law are limited to the terms of this limited warranty. This warranty statement supercedes all 
previous warranties. 

Trademark Information

 

All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered 
trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft 
Corporation. 

8  

  Mud Mount Kits:  MMK-12L & WMKM-12L 

Installation Guide – DOC. 6359 

Summary of Contents for MMK-12L













Reviews: