Crestron
MMK-12L & WMKM-12L
Mud Mount Kits
Mud Mount Kits: MMK-12L &
WMKM-12L
Description
Mud Mount Kits are the preferred mounting option for the Crestron Isys
®
TPS-12L and TPS-12G-L series of wall mounted touchpanels when cutouts made in
the drywall for touchpanel installation are too large. These kits provide support for
additional plastering that can be applied to hide large irregularities in the touchpanel
cutout.
NOTE:
If mounting into another material (other than drywall – for example, wood
lectern, concrete, or rock) use the mounting plate, available in the post-construction
kit WMKM-12 as a hole cutout template. For concrete and rock mounting material,
allow for proper ventilation before mounting the touchpanel.
There are two Mud Mount Kits. The MMK-12L is a pre-construction accessory. Pre-
construction refers to framed walls prior to hanging drywall. This accessory must be
used with either the Pre-Construction Mount Kit (PMK-12L) or Back Box Kit
(BB-12L).
The WMKM-12L is a post-construction kit. Post-construction refers to framed walls
with drywall hung. This accessory is designed with a mounting plate so that it can be
placed anywhere on a wall without the support from a stud.
NOTE:
If necessary, consult the latest revision of the TPS-12L/15L/17L Operations
Guide (Doc. 6355) or the TPS-12G/15G-L Operations Guide (Doc. 6356) for a
complete list of mounting options.
Supplied Hardware
The MMK-12L consists of three parts. These parts produce an assembly that attaches
to the PMK-12L or BB-12L. The WMKM-12L consists of the same three parts that
make up the MMK-12L as well as one mounting plate. The mounting plate is the
part that provides the necessary support for post-construction applications.
Installation Guide – DOC. 6359
Mud Mount Kits: MMK-12L & WMKM-12L
•
1