Multimedia Presentation System 250
Crestron
MPS-250
NOTE:
While adjusting the Program Bass level, the Program Volume
level can be adjusted by turning the volume control clockwise to raise the
volume, or counterclockwise to lower the volume. When adjusting the
volume, the display will change to indicate the volume level.
•
Press
MENU
or
ENTER
to save changes and return to the previous screen.
Set the Program Treble Level
To set the Program Treble level:
•
Access the Program Output menu as described on page 38.
•
Press the
k
or
j
buttons until “Treble” is displayed on the LCD and press
ENTER
to open the Program Treble controls. The current treble level will
be displayed.
Program Treble Control
Program Treble
0db
•
Adjust the Program Treble level with the
j
and
k
buttons. Press the
k
button to increase the treble level. Press the
j
button to lower the treble
level.
NOTE:
While adjusting the Program Treble level, the Program Volume
level can be adjusted by turning the volume control clockwise to raise the
volume, or counterclockwise to lower the volume. When adjusting the
volume, the display will change to indicate the volume level.
•
Press
MENU
or
ENTER
to save changes and return to the previous screen.
Set the Program Minimum
Volume
The Program Minimum Volume control is used to set the lowest volume setting of
the
PROGRAM
output. The
RECORD
and
SPEECH
outputs are not affected by
changes made to the Program Minimum Volume level.
To set the Program Minimum Volume level:
•
Access the Program Output menu as described on page 38.
•
Press the
k
or
j
buttons until “Min Volume” is displayed on the LCD and
press
ENTER
to open the Program Minimum Volume controls.
40
•
Multimedia Presentation System 250: MPS-250
Operations Guide – DOC. 6647A
