Crestron
MPS-250
Multimedia Presentation System 250
Program Startup Volume Control
Prog. Startup Vol.
30%
•
Adjust the Program Startup Volume level with the
j
and
k
buttons. Press
the
k
button to increase the startup volume level. Press the
j
button to
lower the startup volume level. The highest Program Startup Volume
setting is 100%.
NOTE:
While adjusting the Program Startup Volume level, the Program
Volume level can be adjusted by turning the volume control clockwise to
raise the volume, or counterclockwise to lower the volume. When adjusting
the volume, the display will change to indicate the volume level.
•
Press
MENU
or
ENTER
to save changes and return to the previous screen.
Speech Output
The
Speech Output
section of the Audio Setup menu is used to set the
SPEECH
output’s volume level, source mix, bass, treble, speech delay, minimum volume,
maximum volume, and startup volume. The
PROGRAM
and
RECORD
outputs are
not affected by changes made from the Speech Output menu.
Access the Speech Output
Menu
To access the Speech Output menu:
•
Access the Audio Setup menu as described on page 38. The words “Audio
Setup” will be displayed.
•
Press the
k
or
j
buttons until “Speech Output” is displayed on the LCD
and press
ENTER
to open the Speech Output menu.
•
To return to the Audio Setup menu, press
MENU
.
Set the Speech Volume Level
To set the Speech Volume level:
•
Access the Speech Output menu as described above.
•
Adjust the Speech Volume level by turning the volume control clockwise to
raise the volume, or counterclockwise to lower the volume. When adjusting
the volume, the display will change to indicate the volume level.
Set the Speech Source Mix
To set the
SPEECH
output’s source mix:
•
Access the Speech Output menu as described above.
•
Press the
k
or
j
buttons until “Source Mix” is displayed on the LCD and
press
ENTER
to open the Speech Source Mix controls.
Operations Guide – DOC. 6647A
Multimedia Presentation System 250: MPS-250
•
43
