Crestron
MPS-250
Multimedia Presentation System 250
Fixed/Variable Control
Rec. Fixed/Variable
Fixed
•
Press the
k
or
j
buttons until the desired setting is displayed on the LCD.
The current setting is indicated with an asterisk (*). The following settings
are available:
⇒
Fixed
: The
RECORD
output operates at a fixed level.
⇒
Variable
: The
RECORD
output operates at a variable level.
•
Press
ENTER
to save changes and return to the previous screen. To cancel
without saving changes, press
MENU
.
Adjust the Record Startup
Volume
The Record Startup Volume control is used to establish the
RECORD
output’s
volume level setting when an input is selected. The
SPEECH
and
PROGRAM
outputs are not affected by changes made to the Record Startup Volume level.
NOTE:
The Record Volume can only be used if the Fixed/Variable Mode is set to
“Variable”. For more information, refer to “Set Fixed/Variable Mode” on page 50.
To adjust the Record Startup Volume level:
•
Access the Record Output menu as described on page 49.
•
Press the
k
or
j
buttons until “Startup Vol.” is displayed on the LCD and
press
ENTER
to open the Record Startup Volume control.
Record Startup Volume Control
Rec. Startup Vol.
30%
•
Adjust the Record Startup Volume level with the
j
and
k
buttons. Press
the
k
button to increase the Record Startup Volume level. Press the
j
button to lower the Record Startup Volume level. The highest Record
Startup Volume setting is 100%.
NOTE:
While adjusting the Record Startup Volume level, the Record
Volume level can be adjusted by turning the volume control clockwise to
raise the volume, or counterclockwise to lower the volume. When adjusting
the volume, the display will change to indicate the volume level.
Operations Guide – DOC. 6647A
Multimedia Presentation System 250: MPS-250
•
51