Crestron
QM-AMP3x80 Series
QuickMedia™ 3-Channel Amplifiers
The QM-AMP3x80SR has three outputs that are rated for use with three 70V public
address speakers. The outputs on the QMI-AMP3x80SR are rated for use with 100V
public address speakers.
WARNING:
The audio outputs operate at high voltage/current. Disconnect power
prior to connecting speakers to avoid damage to equipment.
Configuration Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website (
www.crestron.com
). To post a question or view
questions you have submitted to Crestron’s True Blue Support, log in at
http://support.crestron.com. First-time users will need to establish a user account.
Configuration is easy thanks to Crestron’s Windows-based programming software.
Crestron SystemBuilder™ software creates a complete project, with no special
programming required. SystemBuilder completes all necessary programming for a
base system including all touchpanel screens and the control system program. The
program output of SystemBuilder is a SIMPL Windows program with much of the
functionality encapsulated in macros and templates. Once SystemBuilder creates the
project, the system interfaces and program logic can be customized in SystemBuilder
or can be easily modified with Crestron development tools (i.e., SIMPL Windows
and Crestron VisionTools
®
Pro-e (VT Pro-e) software packages).
SystemBuilder comes with templates for all supported interfaces. If a user wishes to
create a touchpanel project using templates with a different look-and-feel, this can be
accomplished by making a custom template. This custom template can then be used
by SystemBuilder to create the final project files to be loaded into the panels.
Alternatively, VT Pro-e can be used to tweak projects created with the
SystemBuilder or develop original touchpanel screen designs.
Once the program created by SystemBuilder is loaded into the control system,
Digital Media Tools (DMT) Software can be used to tune the system for optimal
performance. DMT software can be used to test the quality of audio and video
signals as well as fine-tune audio and video settings.
Earliest Version Software Requirements for the PC
NOTE:
Crestron recommends the use of SystemBuilder and Digital Media Tools
software for creating and fine-tuning a QuickMedia system.
NOTE:
Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the
Downloads | Software Updates section of the Crestron website (www.crestron.com).
NOTE:
Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Operations Guide – DOC. 6272
QuickMedia™ 3-Channel Amplifiers: QM-AMP3x80 Series
•
15
