Wall Plate Media Center
Crestron
QM-WMC
TO MIC
This 14-pin connector located on the rear face of the unit is used to
connect the QM-WMC to the optional QM-WMIC. A connecting cable is
supplied with the QM-WMIC.
NET (x2)
These 4-pin mini-Cresnet connectors are for connection to the Cresnet
network. One connector is used to connect to the Cresnet network while
the second connector can be used to connect an optional C2N-DBF12
button pad or other Cresnet device. Cresnet power to the QM-WMC is
supplied through either of these connectors. For more information, refer
to “Network Wiring” on page 14.
QM
8
1
This eight-pin RJ-45 transport port allows connection of the QuickMedia
cable. It carries audio, video, and microphone signals over CAT5E cable.
For more information on QuickMedia refer to “QuickMedia Wiring” on
page 15.
QM Pin Assignments
PIN WIRE
COLORS
(568B)
DESCRIPTION
1 WHITE/ORANGE
-
RGB
Red
2
ORANGE
+ RGB Red
3
WHITE/GREEN
- RGB Green
4
BLUE
+ Digital Audio
5
WHITE/BLUE
- Digital Audio
6
GREEN
+ RGB Green
7
WHITE/BROWN
- RGB Blue
8
BROWN
+ RGB Blue
NOTE:
When transmitting S-video, luminance uses the green video
pathway, and chrominance uses the red video pathway. When
transmitting composite video, the signal is carried on the blue video
pathway.
12
•
Wall Plate Media Center: QM-WMC
Operations & Installation Guide - DOC. 6237A