Crestron
QM-WMC
Wall Plate Media Center
that all communication parameters and necessary options
from the “Port Settings” window are selected as shown after
this step. Click the
OK
button to save the settings and close
the window.
“Port Settings” Window
NOTE:
The parameters shown in the illustration above are the port
settings for a 2-Series control system. Consult the Operations Guide for
the control system being used for exact parameter selection.
4. To verify communication, select
Diagnostics | Establish
Communications (Find Rack)
. This should display a
window that gives the COM port and baud rate. If
communication cannot be established, refer to the
“Troubleshooting Communications” section in the respective
Operations Guide for the control system.
Operations & Installation Guide - DOC. 6237A
Wall Plate Media Center: QM-WMC
•
37