2-Way RF Wireless Touchpanel
Crestron
STX-1700C
Uploading a VT Pro-e Project
A compiled VT Pro-e file has the
extension .vtz
To upload a compiled VT Pro-e project to the STX-1700C, complete the following
steps.
1. Make sure that “Communication Settings” that begins on page 20 has
been performed.
2. As shown below, select
File Transfer | Send Touchpanel
(alternatively, depress
Alt+T
) from the Viewport menu.
Select Send Touchpanel
3. As shown below, select the Net ID of the STX-1700C and then click
OK
. The “Touchpanel Transfer” window appears (refer to the
following graphic).
“Select Network ID” Window
“Touchpanel Transfer” Window
4. Click Browse. The “Open” window appears as shown on the next page.
5. Select the VT Pro-e (vtz) file and click
Open
. The transfer completes
automatically.
24
•
2-Way RF Wireless Touchpanel: STX-1700C
Operations Guide - DOC. 6226A
