Crestron
STX-1700C
2-Way RF Wireless Touchpanel
seconds, and then the LCD stops flashing (the unit stops transmitting if the
touchpanel does not come in range in the allotted time). If the touchpanel comes into
range BEFORE the STRFGWX stops transmitting, the touchpanel will start
responding and the display reverts to whatever screen the control system has active.
If the touchpanel comes into range AFTER the STRFGWX stops transmitting, the
user must touch the screen to activate the gateway. The screen may change if the
control system sent a change to the touchpanel during the time it was out of range.
Further Inquiries
If you cannot locate specific information or have questions after reviewing this
guide, please take advantage of Crestron's award winning customer service team by
calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876].
For assistance in your local time zone, refer to the Crestron website
(
) for a listing of Crestron worldwide offices.
You can also log onto the online help section of the Crestron website to ask
questions about Crestron products. First-time users will need to establish a user
account to fully benefit from all available features.
Future Updates
As Crestron improves functions, adds new features, and extends the capabilities of
the STX-1700C, additional information and programming examples may be made
available as manual updates. These updates are solely electronic and serve as
intermediary supplements prior to the release of a complete technical documentation
revision.
Check the Crestron website periodically for manual update availability and its
relevance. Updates are identified as an “Addendum.”
Operations Guide - DOC. 6226A
2-Way RF Wireless Touchpanel: STX-1700C
•
29
