Trim Ring Mount Kits
Crestron
TMK-12L & WMKT-12L
Setup
Supplied Hardware
The TMK-12L consists of a metal trim ring that attaches to the BB-12L or
PMK-12L. The WMKT-12L consists of the trim ring found in the TMK-12L as well
as a mounting plate, and a cutout template set.
The mounting plate provides the necessary support for post-construction
applications. Two overlay cutout templates (4007385) are supplied. One is in the
shape of the required opening; the other is similar to a frame, with the inner area of
the frame the shape of the required opening. Separate the wall cutout templates along
the perforated lines to create the two templates. (Refer to the illustrations on pages 3
and 4.) Use the template that is most convenient.
Supplied Hardware for the TMK-12L and WMKT-12L
DESCRIPTION PART
NUMBER
QUANTITY
Metal Trim Ring
2013001
1
Metal, Plate, Mounting
(WMKT-12L only)
2012963
1
Overlay, Template, Wall Cutout
(WMKT-12L Only)
4007385 1
The dimensions of the TMK-12L & WMKT-12L are shown below and on the next
page.
Dimensional Drawing – Trim Ring
13.08 in
(33.22 cm)
11.22 in
(28.48 cm)
2.20 in
(5.59 cm)
2
•
Trim Ring Mount Kits: TMK-12L & WMKT-12L
Installation Guide – DOC. 6360A
