background image

Crestron 

TMK-3100L & WMKT-3100L

  

Trim Ring Mount Kits

 

Trim Ring Mount Kits:  
TMK-3100L & WMKT-3100L 

Description 

Trim Ring Mount Kits are the preferred method of mounting the Crestron Isys

®

  

TPS-3100L series of lectern/wall-mounted video touchpanels when a finished 
appearance within a neatly trimmed cutout is required. This application is perfect for 
wallpapering.  

There are two Trim Ring Mount Kits. The TMK-3100L is a pre-construction 
accessory. Pre-construction refers to framed walls prior to hanging drywall. This 
accessory must be used with either the Pre-Construction Mount Kit (PMK-3100L) or 
Back Box Kit (BB-3100L).  

The WMKT-3100L is a post-construction kit. Post-construction refers to framed 
walls with drywall hung. This accessory is designed with a mounting plate so that it 
can be placed anywhere on a wall without the support from a stud. The mounting 
plate is also ideal for installing the touchpanel in a lectern. 

NOTE:  

If necessary, consult the latest revision of the TPS-3100L Operations Guide 

(Doc. 6291) for a complete list of mounting options.  

Supplied Hardware 

The TMK-3100L consists of a metal trim ring that attaches to the PMK-3100L or 
BB-3100L. The WMKT-3100L consists of the trim ring found in the TMK-3100L as 
well as a mounting plate. The mounting plate is the part that provides the necessary 
support for post-construction applications. 

Supplied Hardware of the TMK-3100L and WMKT-3100L 

DESCRIPTION

PART NUMBER

QUANTITY

Metal Plate, Mounting 

(WMKT-3100L only)

2010620

1

Metal Trim Ring

2010619

1

 

Installation Guide – DOC. 6295 

Trim Ring Mount Kits:  TMK-3100L & WMKT-3100L  

  1 

Summary of Contents for TMK-3100L













Reviews: