4.3” Designer Touch Screen
Crestron
TPMC-4SMD
Connectors, Controls & Indicators
#
CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
1
Hard Keys with
Feedback/
Backlight
(10) Optional programmable push buttons,
translucent backlit with (1) white LED per
hard key, programmable for feedback and
backlighting
2
Reset
(1) Recessed push button behind pinhole for
hardware reset (press and hold for four
seconds)
3
LAN PoE*
Green
LED
Yellow
LED
Pin 1
Pin 8
(1) 8-wire RJ-45 with two LED indicators;
10BASE-T/100BASE-TX Ethernet port,
Power over Ethernet compliant;
Green and yellow LEDs indicate Ethernet
port status
PIN
SIGNAL
PIN
SIGNAL
1
TX +
5
N/C
2
TX -
6
RX -
3
RX +
7
N/C
4
N/C
8
N/C
4
Occupancy Sensor
Input
(4) Captive screw terminals comprising (2)
voltage sensing inputs (referenced to
ground) with 24 dc power output;
Input voltage range: 0-30 Vdc;
Sensing threshold: ≥ 4.5 Vdc active,
≤ 1 Vdc inactive;
Maximum dc load: 4 watts @ 24 Vdc,
provides operating power for up to (4)
Crestron GLS Series occupancy sensors
*
The pin out table indicates signal connections. dc power applied by Ethernet power sourcing
equipment (PSE) can connect to either signal pins or N/C pins.
10
•
4.3” Designer Touch Screen: TPMC-4SMD
Operations & Installation Guide – DOC. 7027E
