4.3” Designer Touch Screen
Crestron
TPMC-4SMD
Changing the Button Inserts
The TPMC-4SMD ships with 10 “hard key” push buttons for quick access to
commonly used functions. For a clean appearance, either column of buttons may be
removed and covered using the no-button covers provided.
To change the inserts, use the following procedure:
1.
Insert a small, slot head screwdriver into the appropriate hole on the bottom
of the TPMC-4SMD to release its cover. Refer to the following illustration.
Insertion Points for Button Cover Release
Insert screwdriver to release covers
2.
With the bottom of the cover released, gently remove it from the
TPMC-4SMD.
3.
If removing the button insert, after releasing and removing the button cover,
use a small slot head screwdriver to press and gently lift the button insert
from the TPMC-4SMD. Refer to the following illustration for the press and
lift points on the button insert.
TPMC-4SMD with Button Inserts
Use screwdriver to
release button insert
4.
Gently place the new cover in position and press it into place.
22
•
4.3” Designer Touch Screen: TPMC-4SMD
Operations & Installation Guide – DOC. 7027E
