Crestron
TPMC-4SMD
4.3” Designer Touch Screen
Hardware Hookup
Make the necessary connections as called out in the illustration that follows this
paragraph. Apply power after all connections have been made.
When making connections to the TPMC-4SMD, use Crestron power supplies for
Crestron equipment.
Hardware Connections for the TPMC-4SMD
LAN PoE:
10BASE-T / 100BASE-TX
Ethernet to LAN
Occupancy Sensor Input:
From Room Occupancy Sensor
NOTE:
To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the table of specifications.
Recommended Cleaning
Keep the surface of the touch screen free of dirt, dust or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touch screen. Wipe touch screen clean and avoid getting moisture
beneath the bezels.
CAUTION:
Do not apply excessive pressure to the touch screen display during
handling. Doing so can crack the screen and damage the touch screen.
Operations & Installation Guide – DOC. 7027E
4.3” Designer Touch Screen: TPMC-4SMD
•
27
