V-Panel™ Integrated 12” & 15” Touch Screens
Crestron
TPMC-V12/V15
Video is setup using the
Overscan
and
Color
controls (for
Brightness
,
Hue
,
Contrast
and
Saturation
).
Overscan
Overscan is the active image area in a video picture that is outside the edges of the
display device. Overscan adjustment first came about because of noise and other
artifacts at the beginning and end of the scan lines. To reliably eliminate the noise
and fill the screen with a picture, the outside edge of the active picture area was
pushed out past the edge of the display area. The average or targeted overscan loss is
about 5 to 10% of the image on each edge. Digital images have nearly eliminated the
noise and other artifacts at the edge of the picture, so more of the video image can be
safely shown. The
Normal
setting is usually the correct choice for most video inputs.
Presets
Up to 30 presets may be stored for future retrieval.
Manage Presets
Use the
Manage Presets
tab to copy presets for one source to other sources.
“Video Setup” Window (Manage Presets Tab)
36
•
V-Panel™ Integrated 12” & 15” Touch Screens: TPMC-V12 & TPMC-V15
Operations Guide – DOC. 6940B
