background image

Crestron 

TPMC-V12/15

 

  V-Panel™ Integrated 12” & 15” Touch Screens

 

Software License Agreement 

This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and 

Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and as applicable, 
associated media, printed materials and “online” or electronic documentation (the “Software”). 

BY INSTALLING, COPYING OR OTHERWISE USING THE SOFTWARE, YOU REPRESENT THAT YOU ARE AN 

AUTHORIZED DEALER OF CRESTRON PRODUCTS OR A CRESTRON AUTHORIZED INDEPENDENT PROGRAMMER 
AND YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF 
THIS AGREEMENT, DO NOT INSTALL OR USE THE SOFTWARE. 

IF YOU HAVE PAID A FEE FOR THIS LICENSE AND DO NOT ACCEPT THE TERMS OF THIS AGREEMENT, 

CRESTRON WILL REFUND THE FEE TO YOU PROVIDED YOU (1) CLICK THE DO NOT ACCEPT BUTTON, (2) DO NOT 
INSTALL THE SOFTWARE AND (3) RETURN ALL SOFTWARE, MEDIA AND OTHER DOCUMENTATION AND 
MATERIALS PROVIDED WITH THE SOFTWARE TO CRESTRON AT:  CRESTRON ELECTRONICS, INC., 15 VOLVO 
DRIVE, ROCKLEIGH, NEW JERSEY  07647, WITHIN 30 DAYS OF PAYMENT. 

LICENSE TERMS 

Crestron hereby grants You and You accept a nonexclusive, nontransferable license to use the Software (a) in machine 

readable object code together with the related explanatory written materials provided by Crestron (b) on a central processing unit 
(“CPU”) owned or leased or otherwise controlled exclusively by You and (c) only as authorized in this Agreement and the related 
explanatory files and written materials provided by Crestron. 

If this software requires payment for a license, you may make one backup copy of the Software, provided Your backup copy 

is not installed or used on any CPU. You may not transfer the rights of this Agreement to a backup copy unless the installed copy of 
the Software is destroyed or otherwise inoperable and You transfer all rights in the Software. 

You may not transfer the license granted pursuant to this Agreement or assign this Agreement without the express written 

consent of Crestron. 

If this software requires payment for a license, the total number of CPUs on which all versions of the Software are installed 

may not exceed one per license fee (1) and no concurrent, server or network use of the Software (including any permitted back-up 
copies) is permitted, including but not limited to using the Software (a) either directly or through commands, data or instructions from 
or to another computer (b) for local, campus or wide area network, Internet or Web hosting services or (c) pursuant to any rental, 
sharing or “service bureau” arrangement. 

The Software is designed as a software development and customization tool. As such Crestron cannot and does not 

guarantee any results of use of the Software or that the Software will operate error free and You acknowledge that any development 
that You perform using the Software or Host Application is done entirely at Your own risk. 

The Software is licensed and not sold. Crestron retains ownership of the Software and all copies of the Software and 

reserves all rights not expressly granted in writing. 

OTHER LIMITATIONS 

You must be an Authorized Dealer of Crestron products or a Crestron Authorized Independent Programmer to install or use 

the Software. If Your status as a Crestron Authorized Dealer or Crestron Authorized Independent Programmer is terminated, Your 
license is also terminated. 

You may not rent, lease, lend, sublicense, distribute or otherwise transfer or assign any interest in or to the Software. 
You may not reverse engineer, decompile or disassemble the Software. 
You agree that the Software will not be shipped, transferred or exported into any country or used in any manner prohibited 

by the United States Export Administration Act or any other export laws, restrictions or regulations (“Export Laws”). By downloading 
or installing the Software You (a) are certifying that You are not a national of Cuba, Iran, Iraq, Libya, North Korea, Sudan, Syria or 
any country to which the United States embargoes goods (b) are certifying that You are not otherwise prohibited from receiving the 
Software and (c) You agree to comply with the Export Laws. 

If any part of this Agreement is found void and unenforceable, it will not affect the validity of the balance of the Agreement, 

which shall remain valid and enforceable according to its terms. This Agreement may only be modified by a writing signed by an 
authorized officer of Crestron. Updates may be licensed to You by Crestron with additional or different terms. This is the entire 
agreement between Crestron and You relating to the Software and it supersedes any prior representations, discussions, undertakings, 
communications or advertising relating to the Software. The failure of either party to enforce any right or take any action in the event 
of a breach hereunder shall constitute a waiver unless expressly acknowledged and set forth in writing by the party alleged to have 
provided such waiver. 

Operations Guide – DOC. 6940B 

V-Panel™ Integrated 12” & 15” Touch Screens: TPMC-V12 & TPMC-V15  

  67 

Summary of Contents for TPMC-V12 & TPMC-V15













































































Reviews: