Crestron
TPS-4500IMW
Wall-Mounted Interface Module
Wall-Mounted Interface Module:
TPS-4500IMW
Description
Functional Description
The TPS-4500IMW is designed specifically to serve as an optional
interface module for the Crestron TPS-4500 tilt touchpanels. The module
provides a clean, 1-gang mountable interface for direct connection to the
touchpanel. The TPS-4500IMW creatively hides most of the connections
behind the wall. A visible RJ45 connector can be camouflaged with a
decora wallplate (not supplied) so that the unit blends into any setting.
Physical Description
The TPS-4500IMW, shown on the next page, is an option (can be
purchased separately). The unit mounts into a 1-gang electrical box
(recommended 2.5" depth). The back of the unit is silk-screened and
provides a network and video input connectors. Once installed, there is
only one RJ45 connector visible, which provides connection to the
touchpanel (cable, CA15859, supplied with touchpanel).
I/O Ports
There are four I/O ports available on the TPS-4500IMW. Details of each
are provided as bulleted items on page 3.
Operations Guide - DOC. 5913
Wall-Mounted Interface Module: TPS-4500IMW
•
1
