10-Position RJ45 Panel Mount Interface
Crestron
TPSBLOCK-10
interface module). Refer to the table below for touchpanel and interface
modules that are used with the TPSBLOCK-10.
TPSBLOCK-10 Interface Applications
INTERFACE
MODULE
MODULE TPSBLOCK-10
MODULE
AVAILABILITY DOC. #
INTERFACE
TPS-4500IMC
Supplied
w/touchpanel
5890
NET/VIDEO only
TPS-4500IMW Sold Separately
5913
NET/VIDEO only
TPS-IMC
Supplied
w/touchpanel
5856
NET/VIDEO only
TPS-IMC-BV Sold Separately *
5921
NET/VIDEO or
RGB
TPS-IMW
Sold Separately
5857
NET/VIDEO only
*
The TPS-IMC-BV is supplied with the optional TPS-XVGA-BV card that can only be installed
into specific touchpanels. Refer to the TPS-XVGA-BV Operations & Installation Guide for
further information.
ISYS
TM
TOUCHPANEL
TPS-4500
TPS-5000 &
TPS-6000
NOTE:
For more information about the Crestron TPS interface or wall-
mounted interface module(s), refer to the latest revision of the
appropriate operations guide. The latest version can be obtained from the
Downloads | Product Manuals section of the Crestron website
(www.crestron.com).
Refer to the table below for the pinouts of the TPSBLOCK-10 connector
during NET/VIDEO and RGB applications. Pin 1 of the female
connector is wired to pin 1 of the plug.
Connector/Plug Pinouts
RGB
DESIGNATION
DESCRIPTION
DESCRIPTION
1 *
+24V
Power (Network)
Vertical sync -
2
GND
Ground (Network)
Horizontal sync -
3
C+
Chrominance (Positive)
RED video -
4
C-
Chrominance (Negative)
RED video +
5
Y
Data (Network)
GREEN video -
6
Z
Data (Network)
GREEN video +
7
Y+
Luminance (Positive)/Composite
BLUE video -
8
Y-
Luminance (Negative)/Composite
BLUE video +
9
GND
Ground (Network)
Horizontal sync +
10
+24V
Power (Network)
Vertical sync +
*
PIN
NET/VIDEO
While facing the female connector of the TPSBLOCK-10, pin 1 is located at the upper-left of
the connector.
2
•
10-Position RJ45 Panel Mount Interface: TPSBLOCK-10 Installation Guide - DOC. 5979A
