background image

Waterproof Wireless Handheld Remote 

Crestron 

WPR-48

 

Programming the WPR-48 

Have a question or comment about Crestron software? 

 
Answers to frequently asked questions (FAQs) can be viewed in the Online Help 
section of the Crestron website (

www.crestron.com

). Go to 

http://support.crestron.com

 to post your own question or view questions you have 

submitted to Crestron’s True Blue Support. First-time users will need to establish a 
user account. 

Including a WPR-48 into a system requires adding the WPR-48 into a SIMPL 
Windows program, using the Crestron Viewport to configure the unit for operation, 
and using the Crestron Engraver to prepare and print button labels. 

Earliest Version Software Requirements for the PC 

NOTE:

  Crestron recommends that you use the latest software to take advantage of 

the most recently released features. The latest software is available from the 
Downloads | Software Updates section of the Crestron website (www.crestron.com). 

The following are the earliest useable software version requirements for the PC: 

• 

SIMPL Windows version 2.05.18 or later with library update file 297 
or later. Requires SIMPL+

®

 Cross Compiler version 1.1. 

• 

Crestron Database version 16.2.3 or later. Required by SIMPL 
Windows and Crestron Engraver. 

• 

Viewport version 3.99.01 or later. For setting up the unit configuration. 

• 

Crestron Engraver version 2.2. Requires Crestron Database version 
16.2.3. 

Programming with SIMPL Windows 

NOTE

: The following assumes that the reader has knowledge of SIMPL Windows. 

If not, refer to the extensive help information provided with the software.  

NOTE

: In the following description, the PRO2 control system is used. 

SIMPL Windows is Crestron's software for programming Crestron control systems.  
It provides a well-designed graphical environment with a number of workspaces 
(i.e., windows) in which a programmer can select, configure, program, test, and 
monitor a Crestron control system. SIMPL Windows offers drag and drop 
functionality in a familiar Windows

®

 environment.  

This section describes a sample SIMPL Windows program that includes a WPR-48  

Configuration Manager is where programmers “build” a Crestron control system by 
selecting hardware from the 

Device Library

. In Configuration Manager, drag the 

PRO2 from the Control Systems

 

folder of the 

Device Library

 and drop it in the upper 

pane of the 

System Views

. The PRO2 with its associated communication ports is 

displayed in the 

System Views

 

upper pane.  

14  

  Waterproof Wireless Handheld Remote: WPR-48 

Operations Guide – DOC. 6254A 

Summary of Contents for WPR-48





























Reviews: