T3000-M-A/E-O
June 2004
9
BEGIN SERIAL NO.04074420
9. Reassemble in reverse order, following the directions given.
B. Cabinet
Failure to empty the drawer and to clean the cabinet may result in a fire hazard due to
restricted airflow from the corniditioner.
1. Remove and empty the waste clean-out drawer daily or whenever it is full. Under
heavy use this may need to be done more often
2.
The cabinet glass can be cleaned with any good grade glass or household cleaner
suitable for glass and plastic surfaces. The inside of the cabinet can be cleaned with
the same cleaner as the outside, if it is the type that has a cleaning agent to cut the oil
remaining from the popping operation, and it is acceptable for food contact surfaces.
Do not soak unit with water. Avoid wetting of inside of electrical enclosure.
3. The doors can be cleaned with Cretors’ Plastic. This product is specially formulated
to clean plastic doors. Do not use cleaners that have ammonia or alcohol. The use of
these cleaners will cause the doors to become brittle and crack.
C.
Under Cabinet
The area underneath the machine should be cleaned as required. To reduce the overall
weight of the machine, remove the kettle assembly, by performing the following operations:
1. Unplug the popcorn machine from the power supply.
2. Unplug the kettle from the top of the machine by twisting and pulling the plug out
of the receptacle.
3. Remove the kettle retaining spring to release the kettle.
Use proper lifting techniques when removing the kettle assembly to avoid injury
to your back.
4. Slide kettle away from you towards the front of the machine.
5. Re-install pan in reverse order, making sure pan mounting bracket catches in the
slots cut in the tubing.
This appliance should not be cleaned with a water jet.
