23
HIGH CURRENT 6-PIN HIGH-CURRENT CONNECTOR
(2) RED: 12V POWER INPUT WIRES (30A Fused):
Connect to both of these leads to 12V Constant Power. We recommend the BATTERY POSITIVE
TERMINAL.
BROWN: 12V STARTER OUTPUT 30A:
Connect to circuit in the vehicle that has power ONLY while the STARTER MOTOR is CRANKING.
GRAY: 12V MULTIFUNCTION OUTPUT 20A (Option 6):
This is an optional multi-function output wire the can be configured as a Second IGN, ACC or STARTER output.
Use Option #6 to select ACC, IGN or STARTER.
DEFAULT = ACCESSORY.
.
PINK: 12V IGNITION OUTPUT 20A:
Connect the circuit in the vehicle that provides true Ignition Power for systems such as Spark and Fuel. Typically,
this wire turns ON with the second position of the key, STAYS ON WHEN CRANKING, and continues ON as the
vehicle runs.
PINK / WHITE: 12V MULTIFUNCTION OUTPUT 20A (Option 4):
This is an optional multi-function output wire the can be configured as a Second IGN, ACC or STARTER output.
Use Option #4 to select ACC, IGN or STARTER.
DEFAULT = IGNITION.
REMOTE START DIAGNOSTICS
If the system flashes the LED and Parking Lights one to six times and doesn’t attempt remote start. The
LED will continue to flash the error code until the ignition is turned on, it means the following:
1 Parking Light Flash (1 LED Flash) = Problem with Brake Switch.
2 Parking Light Flashes (2 LED Flashes) = Problem with Hood Switch.
3 Parking Light Flashes (3 LED Flashes) = Tach Problem.
4 Parking Light lashes (4 LED Flashes) = Voltage Sense Problem, battery not charging or to low.
5 Parking Light Flashes (5 LED Flashes) = Problem with (-) Brake Input.
6 Parking Light Flashes (Solid LED) = Valet Service Mode.
